This is a small embeddable ISO18000 6c 860-960MHz UHF RFID Module Reader writers with Ceramic antenna and USB interface. Great to use inserting into some electronic devices, touchscreen, or pads... www.getsmartcard.net, info@getsmartcard.net

I'm planning to make an Rfid Access Security System using Arduino. In this project I will test an access pass system using an RFID module that comes out with my Arduino Starter kit. To be updated SUBSCRIBE. Mabuhay!

Get to know iDTRONIC's powerful embedded RFID Readers and Modules product range.

Our Readers / Modules are available in UHF, HF, NFC and LF.

Visit www.idtronic-rfid.com for more detailed information, or contact as at info@idtronic.de

iDTRONIC - Professional RFID

Your trusted partner for RFID hardware solutions

$2 for 10 PCBs & 24 Hour Production: https://jlcpcb.com

This little 125kHz RFID reader puts out a repeating frame of serial data when a card or fob is moved near the antenna. Here I try to decode that serial data using my oscilloscope.

Links:

1pcs 125K EM4100 RFID Card Reader Module RDM6300 ID RF UART Output For Arduino https://ebay.us/qpp24h

https://www.itead.cc/wiki/RDM6300#Useful_Links

RDL's RFID Reader-USB V2 is designed for reading code from 125KHz card compatible read-only tags . It can be applied in office/home security, personal identification, access control, interactive toy and production control systems etc.Non contact RFID module, uses the advanced Radio Frequency receiving circuit and embedded MCU design, combining with an efficient decoding algorithm.

Product link: https://researchdesignlab.com/modules/rfid-reader-usb-v2.html

Website:...

http://www.amazon.com/dp/B016KE9D2U

RFID module adopts the card reader circuit design of Philips MFRC522 original chip. It’s easy to use, low cost, and can be applied to users for advanced applications such as equipment development and card reader development. This module can be directly loaded into various reader molds. It uses a voltage of 3.3V. With a few wires and a SPI interface, it can achieve direct communication with user's any MCU main board.

This is an automatics storage system using RFID technology. This system includes 1 Master module (STM32F103 microcontroler) and 4 Slaver modules (ATMega8 microcontroler). Master will control 4 cabins via RS485 serial interface and Modbus RTU protocol. Module RFID reader KM523 is used to read/write data to RFID tags, then it sends the information to Master to control the system. In addition, system has 1 TFT LCD graphics TouchScreen 240x320 using ILI9325 driver. LCD touchscreen is used to...

This is a Parallax RFID Reader Module from Parallax.com, being trigger by a glass ampoule RFID chip epoxied into a home made ring.

I have a Raspberry Pi 2 in the white case, which would be inside the building. This is where the decisions are made. The black case goes on the wall outside the door, and has an RFID module with an Arduino Pro Mini. The Arduino sends the RFID data to the Pi, which makes the decision and either does or doesn't unlock the door.

The cases that these devices are in are cases that I designed and 3D printed.

The Latest and the Best RFID UHF long Range Handheld Reader. Light, balanced with an amazing battery life this unit can read a PET tag at almost 4meters. With an inbuilt Windows CE system it is highly customizable for various RFID solutions. Plus it has Add-on Wifi, GPRS data sending and (...hold your breath)... an optional GPS and Biometric Module... It is by far the BEST UHF Handheld Reader in the Market!! Grab One before they put it up as a Collectors Item...Ho ya!!! ..it is that good..watch...

This following video presentation demonstrates dispensing RFID Debit MIFARE VendaCards. Accepts cash and also optional credit cards. Available in 4 different configurations. (1.) Low cost $795.00 Model 5002E single card dispenser. (2.) Low cost $995.00 Model 5002E dual card dispenser. (3.) Combination $1,995.00 Model 5096 dual dispenser with cash acceptance, 2x20 back illuminated LCD, IP address for remove internet polling and RFID MIFARE VendaCard Reader-writer. (4.) Model 5096 with...

This is a short demo of using rotonde with a serial to module, to build a rfid module.

rotonde: https://github.com/HackerLoop/rotonde

serial module: https://github.com/HackerLoop/serial-port-json-server

rfid module:https://github.com/HackerLoop/rotonde-rfid-rfr101a1m

serial module is running on the PI, and rfid module can be developped on my machine and ran from my machine.

uFR Nano available as OEM module with micro USB or RS232 connection.

PCB customization for larger quantities.

________________________

Digital Logic Ltd. company is a manufacturer of high quality RFID NFC equipment. Our devices incude RFID Readers and Programmers with SDK tools, Time Attendance and Access Control devices, BusLogic Ticketing Systems, Tracking Systems and many more.

All our devices were evisioned and developed by our own team of engineers and software developers.

Digital...

This video demonstrates how the TagSense Micro-1356 reader module can be connected to Bluetooth and used to send data to a mobile phone. Note that the reader has also been modified to operate at 3.3V, as described in the datasheet. For longer reading distance, a 5V supply with a 3.3V regulator should be used. An optional external antenna is also shown.

The E-Z RFID Model#3 module comes with four 125kHz RFID cards and is available at engineeringshock.com and electroniclessons.com

Shenzhen Chafon Technology Co., Ltd. is a high-tech enterprise focusing on the research and development of China's first radio frequency (RFID) identification product , including readers&writer/modules/antenna/tags/cards/labels and application (solution) with decades of experience.

www.chafon.com

contact us : sailing@chafon.com ; michael@chafon.com

This video demonstrates the RFID cluster tracking visuals developed during the Smartgeometry 2012 RFID cluster tracking experiment. The RFID tags and readers have been implemented using Synapse RF100 modules. The RFID enclosures have been 3D printed with SLS (selective laser sintering) technology. The visual interface and tracking code has been written in Processing. Cluster densities are uploaded to Pachube for sharing consumption and cloud storage.

Project on How to Interface RFID Module with a PIC18F4550 Microcontroller. For circuit diagram and source code visit http://www.engineersgarage.com/embedded/pic-microcontroller-projects/rfid-interfacing-circuit-code

This project is about a supermarket cart whereby it uses an RFID reader module that calculates the price os each item and sums it up. However, it's also able to deduct and refund any item .

This video show you

4 port Impinj R2000 chip reader module (HYM750) with 3dBi uhf rfid PCB antenna

Hardware installation

Include items

HYM750

HYN505

Demo board

Demo software

Indy R2000 Chip

Excellent Reading Performance

Strong Stability

Heat Dispersion

Low Power Consumption

Fast 4 Antenna Switch Inventory

For more details, please contact me joe@winnix.net

or visit us www.winnix.net

this program can use for making a chip Real-Secure RFID CREDIT-CARD using:

arduino uno

+ RFID - RC522 module

+ blank mifare classic 1k cards.

note: every mifare classic 1k card has 64 blocks and each block has 16 bytes(char) for personal data(some are "security-blocks").

for this program we need 1 block to save our information and rest of it is blank and usable for other data.

https://goo.gl/jPDnE2 Brand N/A Model N/A Quantity 1 Color Blue Material PCB + aluminum alloy Features PN532 NFC / RFID module with smart card for testing Specification IC NXP PN532; Operating voltage: 3.3V; Power Supply Voltage: 3.3~5.5V; Max Supply Current: 150mA; Working Current(Standby Mode): 100mA; Working Current(Write Mode): 120mA; Working Current(Read Mode): 120mA; Indicator: PWR; Interface: SPI interface Std Raspberry Pi 20pins interface...

We are designed new 125KHz RF transceiver module to communicate with Low Frequency RF cards.

Credits : Nandhakumar Sir

(EIRFID Solution Private Limited)

I used a Sonmicro SM130 read/write module to read and write Mifare RFID tags, and talk to Processing. My Processing program plays different songs when different tags are detected.

Sonmicro RFID Reader Library for Processing by Tom igoe et al

Music by Pablo Casals - Bach's Cello Suite No.1 in G, BWV 1007 - I.Prelude

Coldplay - The Scientist

This video show you

1port Impinj R2000 chip reader module (HYM740) with 3dBi uhf rfid PCB antenna

Hardware installation

Include item

HYM740

HYN505

Demo board

Demo software

The embedded UHF RFID reader module offers world-leading performance, form factor, and time-to-market advantages to OEM, Value Added Reseller, and Solution Provider customers. It is designed to the performance standards of full-size readers but is small and efficient enough to be used in various kind of rfid...

Speedata is focused on handheld computing PDA terminals for a wide range of industries as a golden manufacturer with OEM/ODM services.Our products of handheld PDA terminal devices are adopted with flexible configuration platform and mainstream embedded Operating Systems like Android, Windows CE or Windows Mobile. PDA integrates 1D/2D barcode scanner, LF/HF/UHF RFID reader, fingerprint reader, thermal printer, MSR, PSAM, 2.4G communication and IR meter reading function modules etc.

This is a short video to demonstrate the functionality of the code posted at: http://www.engineerallthethings.com/electronics/RFID/RFID.html

This is using a Parallax 28440 Read/Write Module attached to an Arduino Mega