Simple RFID, Parallax 28440, Arduino Mega
This is a short video to demonstrate the functionality of the code posted at: http://www.engineerallthethings.com/electronics/RFID/RFID.html
This is using a Parallax 28440 Read/Write Module attached to an Arduino Mega
From: engineerallthethings
Related topics : parallax rfid read write module
Parallax RFID Reader Module
This is a Parallax RFID Reader Module from Parallax.com, being trigger by a glass ampoule RFID chip epoxied into a home made ring.
From: zlwilly
Related topics : parallax rfid reader module / rfid reader chip
Parallax Perspective: RFID Reader Module
An introduction to the RFID Reader Module from Parallax Inc. Read RFID transponder tags with the affordable RFID Reader module (28340 & #28140).
From: Parallax Inc.
Related topics : parallax rfid reader module / rfid tag and reader / rfid transponder tag
RFID key + PIN code login with PIC18F4580
PIC18F4580 from Microchip. RFID Reader Module from Parallax inc. Membrane keyboard from Elektrosil. Alphanumeric LCD display from Hitachi.
From: Daniel Andersson
Related topics : parallax rfid reader module
Parallax RFID Reader Module 2/2
This is the second video of the RFID Reader Module being trigger by a RFID glass ampoule, this time it is on my hand.
From: zlwilly
Related topics : parallax rfid reader module
PIC32 interupt driven RFID
Basically the same thing as before. A parallax RFID reader module , a piezo buzzer, and some leds to indicate the door lock. So far there is no error handling, the erroneous reads it gets are just left to make it beep. Im waiting on an eeprom to use for saving new tags. This is my first time working with PIC32 so this is rather simple. But its going to be implimented in a web server.
Thank you digikey ! (the boards are a prize I won)
From: Addidis no
Related topics : parallax rfid reader module
Bottle cap selection using Basic Stamp
Using Basic Stamp for the remote control and the conveyor, Throws metal bottle caps to one side and plastic ones to another. (Still not the final version.)
Components Used:
Basic Stamp BS2p (for the conveyor)
Basic Stamp BS2e (for the control)
Parallax's RFID Reader Module (#28140)
Parallax's 2x16 Serial LCD (Backlit)
Parallax's 433 MHz RF Transceiver (#27982) For both, control and conveyor
L298 - H bridge
Phototransistors and IR LEDs
2 Servomotors (HiTEC HS-322HD and PowerHD HD-1800A)
A lot...
From: Luis Padilla
Related topics : parallax rfid reader module
7 Resources