Popular Tags, Blogs, and Videos about rfid inlay

TxDOT: Working For You - Mill & Inlay on rural US 79

voir la vidéoTxDOT's Henderson Maintenance and Special Crews work on US 79 east of Henderson. The process shown here, called "Mill and Inlay," is done in two steps: grinding up the old surface, which is shot into waiting dump trucks, followed by laying down and rolling new hot mix. [ go to Youtube.com ]

Time : 1 min 08
Added : 20/07/07 22:33
Send with Gmail

Videos (74) | Blog posts (8)
 

-> Watch more videos directly on Youtube.com :


TxDOT: Working For You - Mill-and-Inlay on I-20 in Gregg Co.

voir la vidéoTxDOT's Longview Maintenance Section and the Tyler District's Mill Crew perform mill-and-inlay operations on Interstate 20 in Gregg County near Liberty City. The work is made more dangerous with the speed and proximity of the passing vehicles, and with having to change the worn-out teeth on the mill machine in the work zone. [ go to Youtube.com ]

Time : 1 min 05
Added : 20/05/08 17:06
Send with Gmail

Back top

TxDOT: Working For You - Mill and Inlay on US 259

voir la vidéoTxDOT's Henderson Maintenance Section and the Tyler District's Special Jobs Crew perform mill-and-inlay operations on US 259 north of Henderson. The mill machine grinds up worn pavement and shoots it into dump trucks, while fresh hot mix is being laid down in its wake. [ go to Youtube.com ]

Time : 1 min 05
Added : 31/03/08 19:46
Send with Gmail

Back top

Inlay Stickers For Ukulele

voir la vidéoGreat Stickers! They look like REAL inlay! They are also removable! Thickness is: 0.07mm SUPER-THIN, COOL & EASY! Made especially for Guitar, Ukulele, etc. Fret Markers, Body, Headstocks & Pickguards. http://www.inlaysticker.com Please visit our shop! [ go to Youtube.com ]

Time : 0 min 27
Added : 31/12/08 10:11
Send with Gmail

Back top

Stick Dulcimer Making part 4.1 soundboard:the rosette inlay

voir la vidéoIn this video I use Forstner bits and a bench drill to acurately make the recess for the inlay, please note you cannot do this if you dont have a bench drill( the bench drill is the main power tool for this instrument-I use it to do the rosette, thickness the sides, and install frets too) (more) [ go to Youtube.com ]

Time : 10 min 35
Added : 01/10/08 16:45
Send with Gmail

Back top

Inlay Stickers // Top Sellers in JOCKOMO

voir la vidéoGreat Stickers! They look like REAL inlay! They are also removable! Thickness is: 0.07mm SUPER-THIN, COOL & EASY! Made especially for Guitar, Ukulele, etc. Fret Markers, Body, Headstocks & Pickguards. http://stores.ebay.com/Jockomo-InlayStickers [ go to Youtube.com ]

Time : 0 min 52
Added : 26/12/08 11:19
Send with Gmail

Back top

Tympanoplasty with Inlay Technique - Butterfly Graft

voir la vidéoThis video shows the repair of a tympanic membrane perforation (a hole in the eardrum) using the inlay technique or the butterfly graft, developed by Dr Roland Eavey at Massachusetts Eye and Ear Infirmary, Harvard Medical School, Boston, MA. [ go to Youtube.com ]

Time : 2 min 18
Added : 21/11/07 03:29
Send with Gmail

Back top

TxDOT: Working For You - Mill and Inlay on SH 64

voir la vidéoTxDOT's Mill-and-Inlay Crew works with the Canton Maintenance Section to repair the surface of SH 64 south of Wills Point. Mill-and-Inlay is a two-part operation, with the mill grinding up the old pavement, and the hot mix crew following behind and putting down a new surface. [ go to Youtube.com ]

Time : 1 min 06
Added : 02/05/08 21:14
Send with Gmail

Back top

Custom Inlay Mandolin vintage tone woods

voir la vidéoThis mandolin was made from wood from a 30's boat. It has mahogany back and sides and a cedar top. Please listen and check out our site for more info. www.custominlay.com Thanks for looking. [ go to Youtube.com ]

Time : 1 min 17
Added : 03/07/07 13:42
Send with Gmail

Back top

Very Fast RFID Inlays applicators 150 meters per minute

voir la vidéoReelfed system for integrated products : Integrated card, label, RFID, Magnets, holograms. OPTIONS Gluing unit for pressure seal or hotmelt Flexo & Ink-jet printing Hot Stamping Sheeter & Stacker [ go to Youtube.com ]

Time : 3 min 16
Added : 26/01/09 15:00
Send with Gmail

Back top


11 - 20 of 74 Videos
Page: First | < Preceding | Next >
0 | 1 | 2