Handheld RFID Reader goes RTLS with GPS & Cellular
The CS101 handheld reader captures the GPS location where RFID tag reads, bar codes scans, keyboard, or touch-screen operations occur and then instantly communicates that information using the same technology as a mobile phone - all for around $2,800. In this episode of RDIF.net, we put it to the test. Host: Louis Sirico.
CS101 Handheld Reader is the longest read range, highest read rate and highest read yield UHF RFID handheld reader in the world. It enables lightning fast inventory of cases...
From: CSLRFID
Related topics : csl cs101 handheld rfid reader / handheld rfid reader gps / handheld uhf rfid reader / uhf rfid tag reader / rfid tag read range
Arduino RFID Door Lock | Security Access
If you like this project, please like the video and my channel !!!
In this video, we are going to build a Arduino System Electric Door Lock and RFID to authenticate, so your RFID tag will act as a key.
If you place wrong RFID card near RFID reader a buzzer will beep to alert about wrong card.
If you are new to RFID first read its working an interfacing with Arduino.
What You Will Need :
Arduino Board
RFID reader RC522
LEDs
Buzzer
Jumper Wires
Link to the Code...
From: MORY ARDUINO AND TECH
Related topics : rfid door lock system arduino / rfid tag reader arduino / rfid security door locks / rfid card reader system / rfid key card system
CLOUD GATE by SoloInsight
Testing the first production run of CloudGate in our China facility...
Conceived in Chicago, Designed and Developed in Lahore, Produced in Shenzhen...
an Ultimate IOT Smart Gate loaded with 3D Facial + Both Iris and Palm Vein Recognition, Gloves Supported wide angle viewing highest resolution touch screens, Dynamic Lighting Control, QR Code Reader, RFID Card Reader with support of 45 types of RFID technologies, NFC, WiFi and Active RTLS Asset Tracking, 360 degree surveillance with in-built...
From: SoloInsight Inc.
Related topics : rfid card reader technology / types rfid reader / rfid reader for asset tracking / active rfid tracking technology / rtls rfid reader
Simple Netduino Parallax RFID
The most basic version of a Netduino system with a Parallax RFID reader I could come up with. Full details including code and schematic at http://www.markneustadt.com/2014/05/netduino-system-with-parallax-rfid-reader/
From: Mark Neustadt
Related topics : rfid reader system
Server Technology and RF Code Announce Wire-Free Power Monitoring
Server Technology, Inc., the global leader for Power Distribution Unit and Management Solutions, and RF Code, Inc., a leading provider of active IT asset management and environmental monitoring solutions, today announced a rack level wire-free power monitoring solution designed for data center energy optimization. This jointly-developed solution integrates Server Technology's Smart and Switched cabinet power distribution units (CDUs) with patented Per Inlet Power Sensing (PIPSTM), with or...
From: ServerTechnology
Related topics : rfid asset management solutions / rfid tag manager software / active rf tag / rfid reader i code
Raspberry Pi with a Parallax RFID Reader (Serial port)
The python code is available here: https://github.com/cspencer/parallax-rfid-reader/
Here's a more detailed write up: https://medium.com/@coryaspencer/using-the-parallax-serial-rfid-reader-with-the-raspberry-pi-8c948090e687#.c20d4hnts
From: Cory Spencer
Related topics : rfid reader i code
EM-18 RFID Reader Interfacing with ATmega32 by ABLab Solutions
In this project, we will interface an EM-18 RFID Reader with AVR ATmega32 microcontroller. Here, we will use the serial interface of EM-18 RFID Reader to interface the reader with the USART of microcontroller in asynchronous mode. When the RFID reader reads any RFID tag, the ATmega32 microcontroller will read the 12 byte data transmitted from RFID reader and it will display the 12 byte data in a 16X2 alphanumeric LCD. Download All the required project materials like C Code, Circuit diagram and...
From: ABLab Solutions
Related topics : rfid tag reader circuit diagram
RFID SNIFFER
A first look at this RFID reader/writer module which can be bought for a few dollars on eBay. It's cheap but also quite complicated.
The CISC RFID Xplorer Sniffer is a tool to analyze RFID reader and tag signals. The detection and decoding of reader commands and tag responses is done in .
RFID SNIFFER.
Just wanted to show everyone the tools the criminals use to steal your information and steal billions of dollars per year. My setup can capture cards from 18ft .
Présentation d'un...
From: Sherry Robinson
Related topics : rfid tag reader writer / cheap rfid tags and readers / rfid tag reader arduino
RFID Based Access System | RFID Security
Contact: +91 9815216606 , +91 9056960606 . This project RFID Based Secure Access System includes a Microcontroller Unit, Regulated Power Supply, Display unit (LCD), Buzzer for Audio Alarm, RFID Reader and MAX232 to interface the RFID Reader with MCU. Whenever the user will show the RFID card to the RFID Reader then the code of the card will be read by the Reader and send to the MCU. Upon reading the code MCU will check the received code in the database. If the code is present in the database,...
From: TechPacs.com
Related topics : rfid based gate access security system / rfid card reader system / rfid card security system / rfid based projects
125 kHz RFID Tag reader (ATtiny13)
125 kHz RFID tag reader. Based on ATtiny13 micro-controller.
This RFID reader can read the unique 10-digit ID of any 125 kHz RFID Tag,
More information, source code, hex file and schematic diagram can be found on:
http://www.serasidis.gr/circuits/RFID_reader/125kHz_RFID_reader.htm
From: avrsite
Related topics : 125 khz rfid tag reader (attiny13) / rfid tag reader circuit diagram / micro rfid reader / micro rfid tags