Selected articles for topic: rfid controller board

→ 37 articles

Check also 14 Videos for this topic

RFID Controller Modules - novotek.rs

RFID controller is a board which is a master board to RFID antenna, or in other words the functions of reading and writing RFID tags. A controller on the board can also have a function of an encoder or decoder of the data which are put on the RFID tag. A 128-bit AES verification function of a tag at the readers level is performed in this way. Supports standard MiFare cards.

Specification:

o RS232 interface, supports 300 to 115,200 baud rate

o Power supply 5VDC or 12VDC, up to 100mA

o Provide 2 relay outputs for external devices

o AVR Atmega chip...

Website: http://www.novotek.rs

PN532 NFC/RFID Controller Breakout Board v1.6

Home RFID / NFC MiFare NFC Reader Writers PN532 NFC/RFID Controller Breakout Board v1.6

2 of 3

PN532 NFC/RFID Controller Breakout Board v1.6

In-Stock:

DEV-01407

$67.50

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort...

QTY:

Description

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...

Date: 2019-04-11 01:11:32
Website: https://www.sgbotic.com

The Arduino Compatible RFID Reader Module With EEPROM

00:00

The Accessories:

The Optional Control Board:��The controller board is an extra board that comes with two basic programs; both of which act to deactivate an electromagnetic lock.� Best of all, there's audio!� It was designed to work with many electronic devices, including my RFID readers.� If you're not looking to connect the RFID reader to your Arduino UNO, and have no intention...

Website: https://www.kickstarter.com

Welcome to Crossecom - Vehicle ID

�

Crossecom RFID system: Vehicle ID, Access Control, personnel tracking

Crossecom's 'add on' RFID system is designed to allow RFID to be integrated into existing control systems (such as retail automation at a service station) through a simple interface. This means that capabilities such as Vehicle Identification and Personnel Identification can be added onto existing systems in a modular...

Website: http://www.crossecom.com.au

List of Global RFID Companies in Taiwan - Page 3

Fingerprint Time Clock System (TC-100),Fingerprint Based Attendance,Fingerprint Based Access Control,Fingerprint Based Door Locks,RFID Time Clock System (TC-100R),,,.

Address:14F, No. 253, Dong Sec. 1, Guang Ming 6th Rd.

RFID Products,Mini System,Workstation,All in One PC,Portable Computer,Motherboard,Single Board Computer,PC System Case,,,.

Address:No.29, Jhongsing Road., SijhihCity, Taipei County 221,

Wireless rf connector, antenna lightning surge protector, wifi accessories, rfid tag,Wireless Networking Equipment,.

Address:12, Lane 84,...

Website: http://www.companiess.com

RFID based Automatic Door Lock System with Arduino

0 Comment

The Basic necessity of security can be attained by designing various door locks such as mechanical locks or electrical locks. These kind of door locks are designed with one or more keys, but for locking a large area various locks are needed. Generally, traditional locks are heavy and that are not strong as they can damage simply by using some tools. Electronic locks are better over...

Website: https://www.elprocus.com

RFID Based Access Control using Arduino | Full Project ...

GET A FREE PASS TO IOTSHOW AND INDIA ELECTRONICS WEEK

RFID is a non-contact, automatic identification technology that uses radio signals to identify, track, sort and detect a variety of objects including people, vehicles, goods and assets without the need for direct contact or line-of-sight contact (as found necessary in bar code technology). RFID technology can track movement of objects through...

Website: electronicsforu.com

UHF RFID Reader,RFID Scanner,Handheld Terminal,RFID System ...

Happy New Year 2018! Hopeland Wish You Peaceful and Harmony

After honey holidays of New Year, Hopeland's staff come back to work position and present their hope and enthusiasm in the new year 2018. In the past 2017, we have gone through a lot and made great progress. The products' R&D, Hopeland have brought the first gateway RFID reader raspberry Pi, mini size long range UHF RFID reader, 12/24...

Website: hopelandrfid.com

CAN / LIN Training System - 標高電子 Microport.com.tw

?? Brochure Download ?

CAN / LIN Training Kit (BGC-CAN101)

CAN, LIN, USB to CAN, PCI to CAN, PC104 to CAN, UART to CAN, PCI Express to CAN, LIN to CAN, CAN Development Kit

Part No: MP-CAN-BGC-CAN101

Controller Area Network (CAN BUS)

Local Interconnect Network (LIN BUS)

Our CAN/LIN Communication Network Training...

Website: http://www.microport.com.tw

Home Security System Using RFID and Reed Switch Controlled ...

Linux

Home Security System Using RFID and Reed Switch Controlled Using Arduino Microcontroller

Home Security System Using RFID and Reed Switch Controlled using Arduino Micrcontroller

Some notes for the 37 in 1 Arduino Sensor kits.

How I used an Arduino mega to make my own ascom compliant telescope control system with DC servo motors

Arduino Board, a website with some Arduino examples and some small info on...

Website: https://www.pinterest.com

RFID and Keypad Based Access Control System using Arduino

In the previous post, we made an RFID based access control and alert system using Arduino in which system sends us messages when the access was granted or denied. We was also be able to open the door lock and halt the system by sending the message to Arduino. There was a master tag that was used to add/remove other tags.

In this post, we...

Website: https://electronicshobbyists.com

RFID for Airports - GAO RFID Asset Tracking

RFID Solutions & Applications

Asset Tracking for Airports

GAO RFID access control and personnel tracking and location systems can help to assure the security of restricted areas in airports, such as flight lines, baggage handling areas, customs, employee lounges, and other sensitive areas. These techniques could also be applied at maritime ports, railway stations, and passenger bus terminals.

GAO...

Website: http://gaorfidassettracking.com

Home :: Electro-Com RFID. Sensors. Controls. - rfid.com.au

RFID Applications The applications of RFID technology are limitless

Sensors & Controls High quality components, sensors and controls

About Electro-Com "Our aim is total customer satisfaction"

Our Partners Electro-Com's leading brands and global partners

Australia's leading wholesale distributor of RFID, Sensors and Controls

Electro-Com will be at Security

�

Security Exhibition and...

Website: http://www.electrocom.com.au

RFID - RF Stock Management Controller - Proteus Software

» RFID - RF Stock Management Controller

RFID - RF Stock Management Controller

RF Stock Management - RFID Controller

The Proteus RFID Stock Management Controller provides the ability to record the unique details of each stock item that has an RFID Tag/Label. The tags are read by the RFID Reader to record the location and movement of stock into, around and out of the warehouse providing complete...

Website: http://www.proteussoftware.com

RFID / NFC : Adafruit Industries, Unique & fun DIY ...

Wireless / RFID / NFC

RFID / NFC technology is a great way to interact with projects. NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. Because it can read and write tags, you can always just use this for RFID-tag projects. For a good example of how these boards can be used, check out Becky...

Website: https://www.adafruit.com

RFID Reader/Transmitter Board, 125kHz, EM4095, IDC

EM4095 transmitter/receiver, 125 kHz

Signal is coded using standard Manchester coding

Anti-collision algorithms permit simultaneous reading of large numbers of tagged objects while ensuring that each tag is read only once

Board can be used both as a reader and as a transmitter

The RFid...

Website: microcontrollershop.com

SkidWeigh Technology, IVDT Inc. - Products

Lift Truck On-Board Automatic Operational Downtime Recorder

Management Tools to Boost Productivity & Promote Accountability

Revolutionary Approach to Identify Missing Operational Hours

The myKPI is used on a single piece of equipment to identify productivity metrics by measuring moving and standing times loaded and unloaded, lift time and forks times being retracted or extended. This information...

Website: http://www.skidweigh.com

arduino - Electronic pet-door access control - RFID ...

Inspired by projects such as the tweeting cat door and CATaLOG [sic] I'm wanting to add some form of automated access control to our pet door to control who can go in and out, when.

(Full Disclosure: This is a reprint from my blog where I first wrote up the problem, but all feedback is welcome!)

The Players

We currently have three cats, one dog and one pet door.

The Mischievous Mutt

Toby, our two...

Website: electronics.stackexchange.com

arduino - Electronic pet-door access control - RFID ...

Inspired by projects such as the tweeting cat door and CATaLOG [sic] I'm wanting to add some form of automated access control to our pet door to control who can go in and out, when.

(Full Disclosure: This is a reprint from my blog where I first wrote up the problem, but all feedback is welcome!)

The Players

We currently have three cats, one dog and one pet door.

The Mischievous Mutt

Toby, our two...

Website: electronics.stackexchange.com

Make a long-range RFID card reader with Arduino | Freetronics

If you're looking for a fast way to interface RFID readers with your Arduino or compatible board, check out our new� DLOCK RFID Door Lock Shield .�It's a fantastic and simple method of interfacing a variety of RFID readers and an electric door strike to your�...

Website: https://www.freetronics.com.au

CCS, Inc. - RFID Development Kit

Short range RFID Antenna

RS-485 and RS-232 connections

The RS485 connection on the RFID Prototype board is to accomodate a multi-drop/multi-node network of RFID units and other RFID related components.

RFID or Radio Frequency Identification is a generic term for technologies that use dio waves to...

Website: http://www.ccsinfo.com

R1170I - qIDmini: Keyfob Bluetooth UHF RFID Reader ...

CAEN RFID S.r.l. - PI 02032050466 | REA: LU 191067 | C.I.V.: 150.000 EUR Copyright © 2014 CAEN RFID S.r.l. All rights reserved. Use of this website signifies your agreement to our Online Privacy Policy - Cookies Policy .

E-mail

if you have forgotten your password click HERE

Not registered? If you are new to CAEN, please register

If you have not received the activation mail click here

EULA...

Website: http://www.caenrfid.it

R1260I - Slate: USB Desktop UHF RFID Reader / Products ...

E-mail

if you have forgotten your password click HERE

Not registered? If you are new to CAEN, please register

If you have not received the activation mail click here

EULA...

Website: http://www.caenrfid.it

R1170I - qIDmini: Keyfob Bluetooth UHF RFID Reader ...

E-mail

if you have forgotten your password click HERE

Not registered? If you are new to CAEN, please register

If you have not received the activation mail click here

EULA...

Website: http://www.caenrfid.it

Arduino and RFID based Door Access System - Engineering ...

Working of RFID Module | Arduino and RFID based Door Access System

RFID (Radio Frequency identification) basically use an electromagnetic field to detect unique tag assigned to object in the vicinity. A RFID receiver module radiate electromagnetic radiation of about 125KHz through its internally designed coil. When a RFID tag is of 125KHz is placed near to receiver module it will get energized...

Website: https://bestengineeringprojects.com

RFID Tags, RFID Labels | Express Corp

Radio frequency identification (RFID) tags are smart barcode tags that transmit data through radio frequencies. Radio waves transmit data from the RFID tag to RFID reader, which then transmits the data to an RFID computer program. Industrial RFID tags are used to track automobiles, machines, and inventory throughout harsh industrial environments.

Active vs. Passive RFID Tags

Active RFID tags are...

Website: expresscorp.com

RFID RC522 Gate Access Control with Arduino | 14Core.com

In this illustration we will going to wire the RFID (Radio Frequency Identification) Module RC522 in this module it uses a radio signals and a Radio Label Tags for reading and writing data.

How Servo works please refer to this link.

The most common way of using RFID is the identification or a products, where tag can contain information such as product code, the origin, expiration date, and the...

Website: http://www.14core.com

DIY RFID Door Lock - YouTube

Learn how to make a RFID controlled Electronic Door Lock using an Arduino and...

Website: youtube.com

RFID - NFC projects Archives - Use Arduino for Projects

Making a RFID Card Reader with Arduino Yún

Posted by: arduino engineer Posted date: August 06, 2016 | comment : 0

Surya Mattu is a creative technologist who loves to make things. He's based in NYC and working at ITP, a two-year graduate program exploring the imaginative use of communications technologies. Today he's sharing with us how feasible it could be to build an RFID-controlled entry for...

Website: http://duino4projects.com

Guard RFID Solutions Inc.: Board of Directors - Bloomberg

Member of the Board of Directors

Guard RFID Solutions Inc.

�

The information and data displayed in this profile are created and managed by S&P Global Market Intelligence, a division of S&P Global. Bloomberg.com does not create or control the content. For inquiries, please contact S&P Global Market Intelligence directly by clicking here.

Stock Quotes

Most Connected People on the Guard RFID Solutions Inc....

Website: bloomberg.com

Experimenting with the Adafruit PN532 controller shield ...

Experimenting with the Adafruit PN532 controller shield

About the author

Luis Ibanez - Luis Ibáñez works as Senior Software Engineer at Google Inc in New York city.

Posted 28 Mar 2015 Luis Ibanez Feed

110

Image by :

opensource.com

RFIDs--we use them every day. With every visit to the supermarket, public library, bookstore, or department store, we handle objects that have an RFID tag, which...

Date: 2017-03-04 02:49:18
Website: https://opensource.com

Arduino Uno & UHF RFID Reader - Invision Power Board

Arduino Uno & UHF RFID Reader

Started by Guest_melonsdg_* , Mar 31 2014 08:28 PM

Please log in to reply

35 replies to this topic

Posted 31 March 2014 - 08:28 PM

Hello,

I am trying to control the Cottonwood UHF RFID reader with an Arduino Uno.

I am currently testing for simple communication between the devices, by turning the antenna power on and off.

According to the datasheet, the reader must receive 18 03 FF to turn on the antenna...

Website: http://forum.linksprite.com

PN532 NFC/RFID controller breakout board [v1.6] ID: 364 ...

Description-

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require...

Website: https://www.adafruit.com

Advanced Micro Robotics - Robotic Consulting And Design

The On Demand Print and Apply Robotic Label applicator can print uniquely different labels for each bottle, dispense the labels and apply the labels to your containers automatically. Over 100 unlabeled bottles can easily be racked up and automatically labeled by this system as the printer prints each label.

Print & Apply with high resolution graphics using ink jet printer

Connections between the...

Date: 2015-07-22 17:24:51
Website: http://www.advancedmicrorobotics.com

PN532 NFC/RFID controller breakout board - v1.6 Australia

Shield Wiring | Adafruit PN532 RFID/NFC Breakout and ...

by lady ada

Solder the Headers

The first step is to solder the headers to the shield. Cut the header strip to length and insert the sections (long pins down) into an Arduino. Then place the shield on top and solder each pin.

Using the Adafruit NFC Shield with I2C

The Adafruit NFC shield is designed to be used using the I2C by default. I2C only uses two pins (Analog 4 and 5 which are fixed in hardware and cannot be changed) to communicate and one pin as an 'interrupt' pin (Digital 2 - can be changed however). What is nice about I2C is that it is a 'shared' bus - unlike SPI and TTL serial - so you can put as many sensors as...

Website: https://learn.adafruit.com

Arduino RFID Door Lock -Use Arduino for Projects

TIP31A transistor (radio shack/local electronics store $1.50)

Door Lock is from ebay.

Door Fail Secure access control Electric Strike v5 NO $17.50 (kawamall, bay)

Step 2: Build the Arduino controller

The first step to building a RFID door lock with a basic Arduino is to bread board out a basic working arduino. Most Arduino pre-flashed ATMega 168 chips come with the default blink program pre...

Date: 2017-02-20 16:00:56
Website: http://duino4projects.com

37 Resources